Facilities, Instrumentation, and Other Equipment

Construction of the Experimental Aerodynamics Laboratory on the 黑料社区网's East campus was completed in November of 2015. The Low-Speed Research Wind Tunnel was installed in October of 2015 and a thorough qualification of the flow qualitiy will be conducted during the Spring 2016 Semester. The architectural design of the building was performed by Chistopher Herr Architects, who put signficant thought into configuring the brick work to artistically display the wind sweeping across the building's exterior.

Below is a breif listing of the test facilities, instrumentation and other equipment in the Experimental Aerodynamics Laboratory. For more information about experimental capabilities and possible collaboarations please contact the laboratory director Professor John Farnsworth.


 

Test Facilities:

Low-Speed Research Wind tunnel

A new a Low-Speed Wind Tunnel facility is currently being built and installed in the Experimental Aeronautics Laboratory. The wind tunnel is an open-return Wenham (Blower) type low-speed tunnel designed and manufactured by . It has a 0.8 m square test-section that is 5 m long. The tunnel is driven by a 100 HP motor to achieve test section velocities up to approximately 65 m/s (Mach 0.2). Significant portions of the test section are constructed from cast optical-grade acrylic providing unobstructed optical access throughout most of the field. 

High-Speed (Compressible) Nozzle

Origonally constructed as part of an AES senior project the high-speed (or compressible) flow test cart is currently being refurbished to investigate novel methods for thrust vectoring in high-speed nozzles. This apparatus can be reconfigured to test a variety of high-sped flows from free jets to small scale supersonic confined flows. 

ITLL Educational Wind Tunnel

The Aerospace Engineering Sciences Department maintains and opperates a small-scale Eiffel Configuration Windtunnel for educational laboratory assignements in the at the 黑料社区网. The wind tunnel was built by  and has a 0.3 m square test section that is 0.6 m long. It cam achieve test section air speeds from 4.5 m/s to 65 m/s.

Instrumentation:

Stereoscopic Particle Image Velocimetry System

The stereoscopic particle image velocimetry (SPIV) system, which was purchased from , consists primaryily of two of 2560 x 2160 pixel 16 bit imager SCMOS cameras and a Quantel Evergreen 200 532 nm dual pulsed Nd-YAG laser with 200 mJ maximum energy output. The figures at the left show a similar SPIV configuration in another facility.

Stereoscopic Particle Image Velocimetry System

Pressure Scanners

Multiple 16 channel reside within the laboratory. These are used jointly for both research and educational purposes between the research facilities and the ITLL Wind Tunnel. 

Scanivalve DSA 3217 Pressure Scanner

Hot-Wire Anemometry System

A five channel is also present in the lab. This system utilizes a wide selection of probes including Dantec probes and Tao Systems Sen-Flex hot-film sensors.

AN-1003 Multi-channel Hot-wire Anemometry System